Reservoir · Western Australia · Australia · BOM Water Data Online
Quickup
60.4% full
Capacity
1.2 hm³
Volume stored
1 hm³
River
Quickup River
Year completed
1989
Coordinates
34.899°S, 117.385°E
Last updated
2026-06-02
Current fill
60.4%vs 7 days ago
+0.1%gaining
vs 1 year ago
-4.2%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-02.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -34.899, 117.385 · Open in Google Maps
About Quickup
As of June 2, 2026, Quickup is filled to 60.4% of its total capacity, holding roughly 1 hm³ of water out of a maximum 1 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.1 pts), and it is 4.2 points below its level on the same date a year earlier.
Across the readings we hold for Quickup — 996 data points between June 12, 2023 and June 2, 2026 — the level has ranged from a low of 29.3% (June 2, 2025) to a high of 110.5% (September 10, 2025). On average the reservoir is fullest around September and at its lowest around June.
The dam at Quickup was completed in 1989. It is operated by BOM primarily for water supply. It lies within the Quickup River Basin basin at 34.899°S, 117.385°E.
Key facts
- Current fill level
- 60.4%
- Water stored
- 1 hm³
- Total capacity
- 1 hm³
- 7-day change
- ▲ 0.1 pts
- Year-on-year
- ▼ 4.2 pts
- Primary use
- Water supply
- River
- Quickup River
- River basin
- Quickup River Basin
- Year completed
- 1989
- Operator
- BOM
- Coordinates
- 34.899°S, 117.385°E
- Last updated
- June 2, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 2 Jun 2026 | 60.4% | 1 |
| 1 Jun 2026 | 60.3% | 1 |
| 31 May 2026 | 60.3% | 1 |
| 30 May 2026 | 60.3% | 1 |
| 29 May 2026 | 60.2% | 1 |
| 28 May 2026 | 60.2% | 1 |
| 27 May 2026 | 60.2% | 1 |
| 26 May 2026 | 60.2% | 1 |
| 25 May 2026 | 60.3% | 1 |
| 24 May 2026 | 60.3% | 1 |
| 23 May 2026 | 60.4% | 1 |
| 22 May 2026 | 60.4% | 1 |
Frequently asked questions
What is the current water level of Quickup?
As of June 2, 2026, Quickup is at 60.4% of its capacity, holding approximately 1 hm³ of water, according to BOM data.
Is Quickup reservoir full?
No. As of June 2, 2026, Quickup is within its normal operating range at 60.4% of its capacity, so it is not full.
Is the water level at Quickup rising or falling?
The level at Quickup has been broadly stable over the latest week on record (+0.1 points).
How much water can Quickup hold?
Quickup has a total capacity of 1 hm³.
Where is Quickup reservoir located?
Quickup is located in Western Australia, Australia, within the Quickup River Basin basin (coordinates 34.899°S, 117.385°E).
When was Quickup dam built?
The dam at Quickup was completed in 1989.
What is Quickup used for?
Quickup is used primarily for water supply, and is managed by BOM.