reservoirs.earth logo
Reservoirs.EARTH
Western Australia

Reservoir · Western Australia · Australia · BOM Water Data Online

Manjimup

59.1% full

Capacity

1.6 hm³

Volume stored

1 hm³

Year completed

1967

Coordinates

34.279°S, 116.046°E

Last updated

2026-06-09

Current fill

59.1%
Normal

vs 7 days ago

+0.2%

gaining

vs 1 year ago

+3.3%

year-over-year

7-day trend

stable

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -34.279, 116.046 · Open in Google Maps

About Manjimup

As of June 9, 2026, Manjimup is filled to 59.1% of its total capacity, holding roughly 1 hm³ of water out of a maximum 2 hm³. At this level the reservoir is within its normal operating range.

Over the most recent week on record the fill level has held broadly steady (+0.2 pts), and it is 3.3 points above its level on the same date a year earlier.

Across the readings we hold for Manjimup — 1030 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 27.3% (July 16, 2024) to a high of 75.3% (November 27, 2025). On average the reservoir is fullest around October and at its lowest around July.

The dam at Manjimup was completed in 1967. It is operated by BOM primarily for water supply.

Key facts

Current fill level
59.1%
Water stored
1 hm³
Total capacity
2 hm³
7-day change
▲ 0.2 pts
Year-on-year
▲ 3.3 pts
Primary use
Water supply
Year completed
1967
Operator
BOM
Coordinates
34.279°S, 116.046°E
Last updated
June 9, 2026

Recent readings

DateFill levelVolume (hm³)
9 Jun 202659.1%1
8 Jun 202658.9%1
7 Jun 202658.7%1
6 Jun 202658.5%1
5 Jun 202658.3%1
4 Jun 202658.1%1
3 Jun 202657.9%1
2 Jun 202657.6%1
1 Jun 202657.3%1
31 May 202657.1%1
30 May 202656.8%1
29 May 202656.5%1

Frequently asked questions

What is the current water level of Manjimup?

As of June 9, 2026, Manjimup is at 59.1% of its capacity, holding approximately 1 hm³ of water, according to BOM data.

Is Manjimup reservoir full?

No. As of June 9, 2026, Manjimup is within its normal operating range at 59.1% of its capacity, so it is not full.

Is the water level at Manjimup rising or falling?

The level at Manjimup has been broadly stable over the latest week on record (+0.2 points).

How much water can Manjimup hold?

Manjimup has a total capacity of 2 hm³.

Where is Manjimup reservoir located?

Manjimup is located in Western Australia, Australia (coordinates 34.279°S, 116.046°E).

When was Manjimup dam built?

The dam at Manjimup was completed in 1967.

What is Manjimup used for?

Manjimup is used primarily for water supply, and is managed by BOM.

Nearby reservoirs

ShareXLinkedInWhatsApp