Reservoir · Western Australia · Australia · BOM Water Data Online
Ten Mile Brook
69.0% full
Capacity
1.7 hm³
Volume stored
1 hm³
River
Ten Mile Brook
Year completed
1994
Coordinates
33.966°S, 115.127°E
Last updated
2026-06-09
Current fill
69.0%vs 7 days ago
+0.2%gaining
vs 1 year ago
+3.8%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -33.966, 115.127 · Open in Google Maps
About Ten Mile Brook
As of June 9, 2026, Ten Mile Brook is filled to 69.0% of its total capacity, holding roughly 1 hm³ of water out of a maximum 2 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.2 pts), and it is 3.8 points above its level on the same date a year earlier.
Across the readings we hold for Ten Mile Brook — 1054 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 43.5% (May 14, 2024) to a high of 100.9% (September 9, 2025). On average the reservoir is fullest around October and at its lowest around May.
The dam at Ten Mile Brook was completed in 1994. It is operated by BOM primarily for water supply. It lies within the Ten Mile Brook Basin basin at 33.966°S, 115.127°E.
Key facts
- Current fill level
- 69.0%
- Water stored
- 1 hm³
- Total capacity
- 2 hm³
- 7-day change
- ▲ 0.2 pts
- Year-on-year
- ▲ 3.8 pts
- Primary use
- Water supply
- River
- Ten Mile Brook
- River basin
- Ten Mile Brook Basin
- Year completed
- 1994
- Operator
- BOM
- Coordinates
- 33.966°S, 115.127°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 69.0% | 1 |
| 8 Jun 2026 | 68.8% | 1 |
| 7 Jun 2026 | 68.7% | 1 |
| 6 Jun 2026 | 68.6% | 1 |
| 5 Jun 2026 | 68.5% | 1 |
| 4 Jun 2026 | 68.6% | 1 |
| 3 Jun 2026 | 68.6% | 1 |
| 2 Jun 2026 | 68.7% | 1 |
| 1 Jun 2026 | 68.7% | 1 |
| 31 May 2026 | 68.6% | 1 |
| 30 May 2026 | 68.5% | 1 |
| 29 May 2026 | 68.2% | 1 |
Frequently asked questions
What is the current water level of Ten Mile Brook?
As of June 9, 2026, Ten Mile Brook is at 69.0% of its capacity, holding approximately 1 hm³ of water, according to BOM data.
Is Ten Mile Brook reservoir full?
No. As of June 9, 2026, Ten Mile Brook is within its normal operating range at 69.0% of its capacity, so it is not full.
Is the water level at Ten Mile Brook rising or falling?
The level at Ten Mile Brook has been broadly stable over the latest week on record (+0.2 points).
How much water can Ten Mile Brook hold?
Ten Mile Brook has a total capacity of 2 hm³.
Where is Ten Mile Brook reservoir located?
Ten Mile Brook is located in Western Australia, Australia, within the Ten Mile Brook Basin basin (coordinates 33.966°S, 115.127°E).
When was Ten Mile Brook dam built?
The dam at Ten Mile Brook was completed in 1994.
What is Ten Mile Brook used for?
Ten Mile Brook is used primarily for water supply, and is managed by BOM.