Reservoir · Victoria · Australia · BOM Water Data Online
Upper Stony Creek No. 2
17.8% full
Capacity
2.3 hm³
Volume stored
0 hm³
River
Upper Stony Creek
Year completed
1914
Coordinates
37.821°S, 144.203°E
Last updated
2026-06-10
Current fill
17.8%vs 7 days ago
-0.3%losing
vs 1 year ago
-16.3%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -37.821, 144.203 · Open in Google Maps
About Upper Stony Creek No. 2
As of June 10, 2026, Upper Stony Creek No. 2 is filled to 17.8% of its total capacity, holding roughly 0 hm³ of water out of a maximum 2 hm³. At this level the reservoir is critically low.
Over the most recent week on record the fill level has held broadly steady (-0.3 pts), and it is 16.3 points below its level on the same date a year earlier.
Across the readings we hold for Upper Stony Creek No. 2 — 1086 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 15.3% (May 4, 2025) to a high of 89.4% (December 27, 2023). On average the reservoir is fullest around September and at its lowest around May.
The dam at Upper Stony Creek No. 2 was completed in 1914. It is operated by BOM primarily for water supply. It lies within the Upper Stony Creek Basin basin at 37.821°S, 144.203°E.
Key facts
- Current fill level
- 17.8%
- Water stored
- 0 hm³
- Total capacity
- 2 hm³
- 7-day change
- ▼ 0.3 pts
- Year-on-year
- ▼ 16.3 pts
- Primary use
- Water supply
- River
- Upper Stony Creek
- River basin
- Upper Stony Creek Basin
- Year completed
- 1914
- Operator
- BOM
- Coordinates
- 37.821°S, 144.203°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 17.8% | 0 |
| 9 Jun 2026 | 18.1% | 0 |
| 8 Jun 2026 | 18.2% | 0 |
| 7 Jun 2026 | 18.4% | 0 |
| 6 Jun 2026 | 18.7% | 0 |
| 5 Jun 2026 | 19.5% | 0 |
| 4 Jun 2026 | 19.8% | 0 |
| 3 Jun 2026 | 19.3% | 0 |
| 2 Jun 2026 | 18.9% | 0 |
| 1 Jun 2026 | 19.0% | 0 |
| 31 May 2026 | 19.2% | 0 |
| 30 May 2026 | 19.4% | 0 |
Frequently asked questions
What is the current water level of Upper Stony Creek No. 2?
As of June 10, 2026, Upper Stony Creek No. 2 is at 17.8% of its capacity, holding approximately 0 hm³ of water, according to BOM data.
Is Upper Stony Creek No. 2 reservoir full?
No. As of June 10, 2026, Upper Stony Creek No. 2 is critically low at 17.8% of its capacity, so it is not full.
Is the water level at Upper Stony Creek No. 2 rising or falling?
The level at Upper Stony Creek No. 2 has been broadly stable over the latest week on record (-0.3 points).
How much water can Upper Stony Creek No. 2 hold?
Upper Stony Creek No. 2 has a total capacity of 2 hm³.
Where is Upper Stony Creek No. 2 reservoir located?
Upper Stony Creek No. 2 is located in Victoria, Australia, within the Upper Stony Creek Basin basin (coordinates 37.821°S, 144.203°E).
When was Upper Stony Creek No. 2 dam built?
The dam at Upper Stony Creek No. 2 was completed in 1914.
What is Upper Stony Creek No. 2 used for?
Upper Stony Creek No. 2 is used primarily for water supply, and is managed by BOM.