reservoirs.earth logo
Reservoirs.EARTH
Victoria

Reservoir · Victoria · Australia · BOM Water Data Online

Malmsbury

24.0% full

Capacity

12 hm³

Volume stored

3 hm³

River

Coliban river

Year completed

1874

Coordinates

37.213°S, 144.371°E

Last updated

2026-06-09

Current fill

24.0%
Low

vs 7 days ago

0.0%

stable

vs 1 year ago

+5.5%

year-over-year

7-day trend

stable

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -37.213, 144.371 · Open in Google Maps

About Malmsbury

As of June 9, 2026, Malmsbury is filled to 24.0% of its total capacity, holding roughly 3 hm³ of water out of a maximum 12 hm³. At this level the reservoir is low.

Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it is 5.5 points above its level on the same date a year earlier.

Across the readings we hold for Malmsbury — 1081 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 12.3% (April 23, 2025) to a high of 108.8% (July 11, 2023). On average the reservoir is fullest around October and at its lowest around May.

The dam at Malmsbury was completed in 1874. It is operated by BOM primarily for water supply. It lies within the Coliban river Basin basin at 37.213°S, 144.371°E.

Key facts

Current fill level
24.0%
Water stored
3 hm³
Total capacity
12 hm³
7-day change
No change
Year-on-year
▲ 5.5 pts
Primary use
Water supply
River
Coliban river
River basin
Coliban river Basin
Year completed
1874
Operator
BOM
Coordinates
37.213°S, 144.371°E
Last updated
June 9, 2026

Recent readings

DateFill levelVolume (hm³)
9 Jun 202624.0%3
8 Jun 202624.0%3
7 Jun 202623.9%3
6 Jun 202623.8%3
5 Jun 202623.7%3
4 Jun 202623.6%3
3 Jun 202623.4%3
2 Jun 202623.2%3
1 Jun 202623.0%3
31 May 202622.8%3
30 May 202622.8%3
29 May 202622.7%3

Frequently asked questions

What is the current water level of Malmsbury?

As of June 9, 2026, Malmsbury is at 24.0% of its capacity, holding approximately 3 hm³ of water, according to BOM data.

Is Malmsbury reservoir full?

No. As of June 9, 2026, Malmsbury is low at 24.0% of its capacity, so it is not full.

Is the water level at Malmsbury rising or falling?

The level at Malmsbury has been broadly stable over the latest week on record (0.0 points).

How much water can Malmsbury hold?

Malmsbury has a total capacity of 12 hm³.

Where is Malmsbury reservoir located?

Malmsbury is located in Victoria, Australia, within the Coliban river Basin basin (coordinates 37.213°S, 144.371°E).

When was Malmsbury dam built?

The dam at Malmsbury was completed in 1874.

What is Malmsbury used for?

Malmsbury is used primarily for water supply, and is managed by BOM.

Nearby reservoirs

ShareXLinkedInWhatsApp