Reservoir · Victoria · Australia · BOM Water Data Online
Evansford
99.9% full
Capacity
1.4 hm³
Volume stored
1 hm³
River
McCallum Cree
Year completed
1885
Coordinates
37.279°S, 143.654°E
Last updated
2026-07-28
Current fill
99.9%vs 7 days ago
0.0%stable
vs 1 year ago
+23.8%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-07-28.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -37.279, 143.654 · Open in Google Maps
About Evansford
As of July 28, 2026, Evansford is filled to 99.9% of its total capacity, holding roughly 1 hm³ of water out of a maximum 1 hm³. At this level the reservoir is high.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it is 23.8 points above its level on the same date a year earlier.
Across the readings we hold for Evansford — 610 data points between November 26, 2024 and July 28, 2026 — the level has ranged from a low of 52.2% (June 3, 2025) to a high of 102.1% (July 13, 2026). On average the reservoir is fullest around October and at its lowest around August.
The dam at Evansford was completed in 1885. It is operated by BOM primarily for water supply. It lies within the McCallum Cree Basin basin at 37.279°S, 143.654°E.
Key facts
- Current fill level
- 99.9%
- Water stored
- 1 hm³
- Total capacity
- 1 hm³
- 7-day change
- No change
- Year-on-year
- ▲ 23.8 pts
- Primary use
- Water supply
- River
- McCallum Cree
- River basin
- McCallum Cree Basin
- Year completed
- 1885
- Operator
- BOM
- Coordinates
- 37.279°S, 143.654°E
- Last updated
- July 28, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 28 Jul 2026 | 99.9% | 1 |
| 27 Jul 2026 | 99.9% | 1 |
| 26 Jul 2026 | 99.9% | 1 |
| 25 Jul 2026 | 100.2% | 1 |
| 24 Jul 2026 | 100.3% | 1 |
| 23 Jul 2026 | 100.4% | 1 |
| 22 Jul 2026 | 100.3% | 1 |
| 21 Jul 2026 | 100.4% | 1 |
| 20 Jul 2026 | 100.4% | 1 |
| 19 Jul 2026 | 100.5% | 1 |
| 18 Jul 2026 | 100.6% | 1 |
| 17 Jul 2026 | 100.7% | 1 |
Frequently asked questions
What is the current water level of Evansford?
As of July 28, 2026, Evansford is at 99.9% of its capacity, holding approximately 1 hm³ of water, according to BOM data.
Is Evansford reservoir full?
Evansford is essentially full, sitting at 99.9% of capacity as of July 28, 2026.
Is the water level at Evansford rising or falling?
The level at Evansford has been broadly stable over the latest week on record (0.0 points).
How much water can Evansford hold?
Evansford has a total capacity of 1 hm³.
Where is Evansford reservoir located?
Evansford is located in Victoria, Australia, within the McCallum Cree Basin basin (coordinates 37.279°S, 143.654°E).
When was Evansford dam built?
The dam at Evansford was completed in 1885.
What is Evansford used for?
Evansford is used primarily for water supply, and is managed by BOM.