reservoirs.earth logo
Reservoirs.EARTH
Victoria

Reservoir · Victoria · Australia · BOM Water Data Online

Wilsons

18.0% full

Capacity

1 hm³

Volume stored

0 hm³

River

Lal Lal Creek

Year completed

1891

Coordinates

37.510°S, 144.019°E

Last updated

2026-06-10

Current fill

18.0%
Critical

vs 7 days ago

+0.2%

gaining

vs 1 year ago

+3.3%

year-over-year

7-day trend

stable

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -37.510, 144.019 · Open in Google Maps

About Wilsons

As of June 10, 2026, Wilsons is filled to 18.0% of its total capacity, holding roughly 0 hm³ of water out of a maximum 1 hm³. At this level the reservoir is critically low.

Over the most recent week on record the fill level has held broadly steady (+0.2 pts), and it is 3.3 points above its level on the same date a year earlier.

Across the readings we hold for Wilsons — 1080 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 0.0% (May 25, 2025) to a high of 21.8% (October 3, 2025). On average the reservoir is fullest around October and at its lowest around August.

The dam at Wilsons was completed in 1891. It is operated by BOM primarily for water supply. It lies within the Lal Lal Creek Basin basin at 37.510°S, 144.019°E.

Key facts

Current fill level
18.0%
Water stored
0 hm³
Total capacity
1 hm³
7-day change
▲ 0.2 pts
Year-on-year
▲ 3.3 pts
Primary use
Water supply
River
Lal Lal Creek
River basin
Lal Lal Creek Basin
Year completed
1891
Operator
BOM
Coordinates
37.510°S, 144.019°E
Last updated
June 10, 2026

Recent readings

DateFill levelVolume (hm³)
10 Jun 202618.0%0
9 Jun 202617.8%0
8 Jun 202617.6%0
7 Jun 202617.5%0
6 Jun 202617.3%0
5 Jun 202617.1%0
4 Jun 202616.5%0
3 Jun 202616.1%0
2 Jun 202615.9%0
1 Jun 202615.6%0
31 May 202615.5%0
30 May 202615.4%0

Frequently asked questions

What is the current water level of Wilsons?

As of June 10, 2026, Wilsons is at 18.0% of its capacity, holding approximately 0 hm³ of water, according to BOM data.

Is Wilsons reservoir full?

No. As of June 10, 2026, Wilsons is critically low at 18.0% of its capacity, so it is not full.

Is the water level at Wilsons rising or falling?

The level at Wilsons has been broadly stable over the latest week on record (+0.2 points).

How much water can Wilsons hold?

Wilsons has a total capacity of 1 hm³.

Where is Wilsons reservoir located?

Wilsons is located in Victoria, Australia, within the Lal Lal Creek Basin basin (coordinates 37.510°S, 144.019°E).

When was Wilsons dam built?

The dam at Wilsons was completed in 1891.

What is Wilsons used for?

Wilsons is used primarily for water supply, and is managed by BOM.

Nearby reservoirs

ShareXLinkedInWhatsApp