Reservoir · New South Wales · Australia · BOM Water Data Online
Berembed Weir
12.2% full
Capacity
3.4 hm³
Volume stored
0 hm³
Coordinates
34.887°S, 146.840°E
Last updated
2026-07-29
Current fill
12.2%vs 7 days ago
-4.7%losing
vs 1 year ago
-65.7%year-over-year
7-day trend
↓falling
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-07-29.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -34.887, 146.840 · Open in Google Maps
About Berembed Weir
As of July 29, 2026, Berembed Weir is filled to 12.2% of its total capacity, holding roughly 0 hm³ of water out of a maximum 3 hm³. At this level the reservoir is critically low.
Over the most recent week on record the fill level has fallen by 4.7 percentage points, and it is 65.7 points below its level on the same date a year earlier.
Across the readings we hold for Berembed Weir — 1096 data points between July 30, 2023 and July 29, 2026 — the level has ranged from a low of 7.3% (June 23, 2025) to a high of 93.3% (April 17, 2024). On average the reservoir is fullest around January and at its lowest around July.
It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 12.2%
- Water stored
- 0 hm³
- Total capacity
- 3 hm³
- 7-day change
- ▼ 4.7 pts
- Year-on-year
- ▼ 65.7 pts
- Primary use
- Water supply
- Operator
- BOM
- Coordinates
- 34.887°S, 146.840°E
- Last updated
- July 29, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 29 Jul 2026 | 12.2% | 0 |
| 28 Jul 2026 | 16.9% | 1 |
| 27 Jul 2026 | 15.2% | 1 |
| 26 Jul 2026 | 13.8% | 0 |
| 25 Jul 2026 | 14.3% | 0 |
| 24 Jul 2026 | 15.0% | 1 |
| 23 Jul 2026 | 15.9% | 1 |
| 22 Jul 2026 | 17.3% | 1 |
| 21 Jul 2026 | 18.8% | 1 |
| 20 Jul 2026 | 20.7% | 1 |
| 19 Jul 2026 | 21.6% | 1 |
| 18 Jul 2026 | 19.7% | 1 |
Frequently asked questions
What is the current water level of Berembed Weir?
As of July 29, 2026, Berembed Weir is at 12.2% of its capacity, holding approximately 0 hm³ of water, according to BOM data.
Is Berembed Weir reservoir full?
No. As of July 29, 2026, Berembed Weir is critically low at 12.2% of its capacity, so it is not full.
Is the water level at Berembed Weir rising or falling?
The level at Berembed Weir is falling — it dropped 4.7 percentage points over the latest week on record.
How much water can Berembed Weir hold?
Berembed Weir has a total capacity of 3 hm³.
Where is Berembed Weir reservoir located?
Berembed Weir is located in New South Wales, Australia (coordinates 34.887°S, 146.840°E).
What is Berembed Weir used for?
Berembed Weir is used primarily for water supply, and is managed by BOM.