reservoirs.earth logo
Reservoirs.EARTH
New South Wales

Reservoir · New South Wales · Australia · BOM Water Data Online

Tombullen

9.3% full

Capacity

11.2 hm³

Volume stored

1 hm³

Coordinates

34.648°S, 146.152°E

Last updated

2026-07-29

Current fill

9.3%
Critical

vs 7 days ago

-0.1%

losing

vs 1 year ago

-80.4%

year-over-year

7-day trend

stable

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-07-29.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -34.648, 146.152 · Open in Google Maps

About Tombullen

As of July 29, 2026, Tombullen is filled to 9.3% of its total capacity, holding roughly 1 hm³ of water out of a maximum 11 hm³. At this level the reservoir is critically low.

Over the most recent week on record the fill level has held broadly steady (-0.1 pts), and it is 80.4 points below its level on the same date a year earlier.

Across the readings we hold for Tombullen — 1076 data points between July 30, 2023 and July 29, 2026 — the level has ranged from a low of 4.6% (August 7, 2025) to a high of 96.2% (May 2, 2024). On average the reservoir is fullest around November and at its lowest around July.

It is operated by BOM primarily for water supply.

Key facts

Current fill level
9.3%
Water stored
1 hm³
Total capacity
11 hm³
7-day change
▼ 0.1 pts
Year-on-year
▼ 80.4 pts
Primary use
Water supply
Operator
BOM
Coordinates
34.648°S, 146.152°E
Last updated
July 29, 2026

Recent readings

DateFill levelVolume (hm³)
29 Jul 20269.3%1
28 Jul 20269.4%1
27 Jul 20269.5%1
26 Jul 20269.5%1
25 Jul 20269.5%1
24 Jul 20269.6%1
23 Jul 20269.6%1
22 Jul 20269.7%1
21 Jul 20269.8%1
20 Jul 20269.8%1
19 Jul 20269.1%1
18 Jul 20268.9%1

Frequently asked questions

What is the current water level of Tombullen?

As of July 29, 2026, Tombullen is at 9.3% of its capacity, holding approximately 1 hm³ of water, according to BOM data.

Is Tombullen reservoir full?

No. As of July 29, 2026, Tombullen is critically low at 9.3% of its capacity, so it is not full.

Is the water level at Tombullen rising or falling?

The level at Tombullen has been broadly stable over the latest week on record (-0.1 points).

How much water can Tombullen hold?

Tombullen has a total capacity of 11 hm³.

Where is Tombullen reservoir located?

Tombullen is located in New South Wales, Australia (coordinates 34.648°S, 146.152°E).

What is Tombullen used for?

Tombullen is used primarily for water supply, and is managed by BOM.

Nearby reservoirs

ShareXLinkedInWhatsApp