Reservoir · Texas · United States · USGS NWIS
Barker Reservoir
0.0% full
Capacity
258.53 hm³
Volume stored
0 hm³
Coordinates
29.770°N, 95.647°W
Last updated
2026-08-13
Current fill
0.0%vs 7 days ago
0.0%stable
vs 1 year ago
0.0%year-over-year
7-day trend
→stable
Data source: USGS National Water Information System (NWIS) — daily reservoir storage volume. Capacity is the design (normal full-pool) capacity from the US National Inventory of Dams (NID); fill % = current volume ÷ design capacity. Last reading: 2026-08-13.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. 29.770, -95.647 · Open in Google Maps
About Barker Reservoir
As of August 13, 2026, Barker Reservoir is filled to 0.0% of its total capacity, holding roughly 0 hm³ of water out of a maximum 259 hm³. At this level the reservoir is critically low.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Barker Reservoir — 1460 data points between August 14, 2022 and August 13, 2026 — the level has ranged from a low of 0.0% (August 14, 2022) to a high of 12.9% (January 28, 2024). On average the reservoir is fullest around February and at its lowest around October.
It is operated by USGS primarily for multiple purposes. It lies within the Texas basin at 29.770°N, 95.647°W.
Key facts
- Current fill level
- 0.0%
- Water stored
- 0 hm³
- Total capacity
- 259 hm³
- 7-day change
- No change
- Year-on-year
- No change
- Primary use
- Multipurpose
- River basin
- Texas
- Operator
- USGS
- Coordinates
- 29.770°N, 95.647°W
- Last updated
- August 13, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 13 Aug 2026 | 0.0% | 0 |
| 12 Aug 2026 | 0.0% | 0 |
| 11 Aug 2026 | 0.0% | 0 |
| 10 Aug 2026 | 0.0% | 0 |
| 9 Aug 2026 | 0.0% | 0 |
| 8 Aug 2026 | 0.0% | 0 |
| 7 Aug 2026 | 0.0% | 0 |
| 6 Aug 2026 | 0.0% | 0 |
| 5 Aug 2026 | 0.0% | 0 |
| 4 Aug 2026 | 0.0% | 0 |
| 3 Aug 2026 | 0.0% | 0 |
| 2 Aug 2026 | 0.0% | 0 |
Frequently asked questions
What is the current water level of Barker Reservoir?
As of August 13, 2026, Barker Reservoir is at 0.0% of its capacity, holding approximately 0 hm³ of water, according to USGS NWIS data.
Is Barker Reservoir reservoir full?
No. As of August 13, 2026, Barker Reservoir is critically low at 0.0% of its capacity, so it is not full.
Is the water level at Barker Reservoir rising or falling?
The level at Barker Reservoir has been broadly stable over the latest week on record (0.0 points).
How much water can Barker Reservoir hold?
Barker Reservoir has a total capacity of 259 hm³.
Where is Barker Reservoir reservoir located?
Barker Reservoir is located in Texas, United States, within the Texas basin (coordinates 29.770°N, 95.647°W).
What is Barker Reservoir used for?
Barker Reservoir is used primarily for multiple purposes, and is managed by USGS.