State / Territory · Australia · BOM
New South Wales and Victoria
57.8% average fill
Reservoirs
3
Volume stored
1,824 hm³
Total capacity
3,193 hm³
Loading map…
Reservoirs
Sorted by capacityHume
Updated 2026-08-02
Yarrawonga Weir
Updated 2026-08-01
Torrumbarry Weir
No dataData source: Bureau of Meteorology Water Data Online (KiWIS API). Publicly-owned storages reported under Australia's Water Regulations 2008.
About reservoirs in New South Wales and Victoria
As of August 2, 2026, the reservoirs we track across New South Wales and Victoria that report live levels hold roughly 1,824 hm³ of water — about 57.8% of their combined capacity. Taken together, New South Wales and Victoria's reservoirs are within their normal operating range.
None of the tracked reservoirs are currently at critically low levels. Yarrawonga Weir is the fullest at 95.0%, while Hume is the lowest at 56.4%.
Over the most recent week on record, 1 reservoir rose across New South Wales and Victoria.
Storage figures for New South Wales and Victoria come from BOM; the most recent reading is from August 2, 2026. Each reservoir below links to its own page with full history and seasonal context.
New South Wales and Victoria at a glance
- Reservoirs tracked
- 3
- Average fill
- 57.8%
- Water stored
- 1,824 hm³
- Combined capacity
- 3,193 hm³
- Fullest
- Yarrawonga Weir (95.0%)
- Lowest
- Hume (56.4%)
- Last updated
- August 2, 2026
Frequently asked questions
How full are reservoirs in New South Wales and Victoria right now?
As of August 2, 2026, the reservoirs tracked in New South Wales and Victoria that report live levels are 57.8% full overall, holding about 1,824 hm³ of water.
How many reservoirs are there in New South Wales and Victoria?
reservoirs.earth tracks 3 reservoirs in New South Wales and Victoria, with a combined storage capacity of 3,193 hm³.
Which reservoir in New South Wales and Victoria is the fullest?
Yarrawonga Weir is currently the fullest reservoir in New South Wales and Victoria, at 95.0% of capacity.
Which reservoir in New South Wales and Victoria is the lowest?
Hume is currently the lowest in New South Wales and Victoria, at 56.4% of capacity.
Where does the reservoir data for New South Wales and Victoria come from?
All storage figures for New South Wales and Victoria come from BOM, an official source, last updated August 2, 2026.