Reservoir · Queensland · Australia · BOM Water Data Online
Wuruma
98.1% full
Capacity
165.4 hm³
Volume stored
162 hm³
Year completed
1968
Coordinates
25.204°S, 150.986°E
Last updated
2026-06-10
Current fill
98.1%vs 7 days ago
0.0%stable
vs 1 year ago
-1.3%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -25.204, 150.986 · Open in Google Maps
About Wuruma
As of June 10, 2026, Wuruma is filled to 98.1% of its total capacity, holding roughly 162 hm³ of water out of a maximum 165 hm³. At this level the reservoir is high. Of that total, about 163 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it is 1.3 points below its level on the same date a year earlier.
Across the readings we hold for Wuruma — 1095 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 68.8% (December 12, 2025) to a high of 119.2% (March 10, 2026). On average the reservoir is fullest around April and at its lowest around November.
The dam at Wuruma was completed in 1968. It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 98.1%
- Water stored
- 162 hm³
- Total capacity
- 165 hm³
- Usable capacity
- 163 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 1.3 pts
- Primary use
- Water supply
- Year completed
- 1968
- Operator
- BOM
- Coordinates
- 25.204°S, 150.986°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 98.1% | 162 |
| 9 Jun 2026 | 98.1% | 162 |
| 8 Jun 2026 | 98.1% | 162 |
| 7 Jun 2026 | 98.2% | 162 |
| 6 Jun 2026 | 98.2% | 162 |
| 5 Jun 2026 | 98.3% | 163 |
| 4 Jun 2026 | 98.3% | 163 |
| 3 Jun 2026 | 98.3% | 163 |
| 2 Jun 2026 | 98.4% | 163 |
| 1 Jun 2026 | 98.4% | 163 |
| 31 May 2026 | 98.4% | 163 |
| 30 May 2026 | 98.4% | 163 |
Frequently asked questions
What is the current water level of Wuruma?
As of June 10, 2026, Wuruma is at 98.1% of its capacity, holding approximately 162 hm³ of water, according to BOM data.
Is Wuruma reservoir full?
Wuruma is essentially full, sitting at 98.1% of capacity as of June 10, 2026.
Is the water level at Wuruma rising or falling?
The level at Wuruma has been broadly stable over the latest week on record (0.0 points).
How much water can Wuruma hold?
Wuruma has a total capacity of 165 hm³, of which about 163 hm³ is usable storage.
Where is Wuruma reservoir located?
Wuruma is located in Queensland, Australia (coordinates 25.204°S, 150.986°E).
When was Wuruma dam built?
The dam at Wuruma was completed in 1968.
What is Wuruma used for?
Wuruma is used primarily for water supply, and is managed by BOM.