Reservoir · Queensland · Australia · BOM Water Data Online
Kirar Weir
100.4% full
Capacity
9.5 hm³
Volume stored
10 hm³
Year completed
2005
Coordinates
25.299°S, 151.063°E
Last updated
2026-06-10
Current fill
100.4%vs 7 days ago
0.0%stable
vs 1 year ago
-0.6%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -25.299, 151.063 · Open in Google Maps
About Kirar Weir
As of June 10, 2026, Kirar Weir is filled to 100.4% of its total capacity, holding roughly 10 hm³ of water out of a maximum 10 hm³. At this level the reservoir is effectively full.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Kirar Weir — 1094 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 42.9% (November 7, 2023) to a high of 140.0% (March 11, 2026). On average the reservoir is fullest around May and at its lowest around November.
The dam at Kirar Weir was completed in 2005. It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 100.4%
- Water stored
- 10 hm³
- Total capacity
- 10 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 0.6 pts
- Primary use
- Water supply
- Year completed
- 2005
- Operator
- BOM
- Coordinates
- 25.299°S, 151.063°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 100.4% | 10 |
| 9 Jun 2026 | 100.4% | 10 |
| 8 Jun 2026 | 100.5% | 10 |
| 7 Jun 2026 | 100.5% | 10 |
| 6 Jun 2026 | 100.5% | 10 |
| 5 Jun 2026 | 100.5% | 10 |
| 4 Jun 2026 | 100.8% | 10 |
| 3 Jun 2026 | 101.0% | 10 |
| 2 Jun 2026 | 101.1% | 10 |
| 1 Jun 2026 | 101.1% | 10 |
| 31 May 2026 | 101.2% | 10 |
| 30 May 2026 | 101.3% | 10 |
Frequently asked questions
What is the current water level of Kirar Weir?
As of June 10, 2026, Kirar Weir is at 100.4% of its capacity, holding approximately 10 hm³ of water, according to BOM data.
Is Kirar Weir reservoir full?
Kirar Weir is essentially full, sitting at 100.4% of capacity as of June 10, 2026.
Is the water level at Kirar Weir rising or falling?
The level at Kirar Weir has been broadly stable over the latest week on record (0.0 points).
How much water can Kirar Weir hold?
Kirar Weir has a total capacity of 10 hm³.
Where is Kirar Weir reservoir located?
Kirar Weir is located in Queensland, Australia (coordinates 25.299°S, 151.063°E).
When was Kirar Weir dam built?
The dam at Kirar Weir was completed in 2005.
What is Kirar Weir used for?
Kirar Weir is used primarily for water supply, and is managed by BOM.