Reservoir · Tasmania · Australia · BOM Water Data Online
Woods Lake
40.8% full
Capacity
63.9 hm³
Volume stored
26 hm³
Coordinates
42.081°S, 147.003°E
Last updated
2026-06-09
Current fill
40.8%vs 7 days ago
0.0%stable
vs 1 year ago
+1.7%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -42.081, 147.003 · Open in Google Maps
About Woods Lake
As of June 9, 2026, Woods Lake is filled to 40.8% of its total capacity, holding roughly 26 hm³ of water out of a maximum 64 hm³. At this level the reservoir is within its normal operating range. Of that total, about 44 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it is 1.7 points above its level on the same date a year earlier.
Across the readings we hold for Woods Lake — 1094 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 33.9% (March 5, 2024) to a high of 61.1% (September 30, 2024). On average the reservoir is fullest around September and at its lowest around February.
It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 40.8%
- Water stored
- 26 hm³
- Total capacity
- 64 hm³
- Usable capacity
- 44 hm³
- 7-day change
- No change
- Year-on-year
- ▲ 1.7 pts
- Primary use
- Water supply
- Operator
- BOM
- Coordinates
- 42.081°S, 147.003°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 40.8% | 26 |
| 8 Jun 2026 | 40.8% | 26 |
| 7 Jun 2026 | 40.9% | 26 |
| 6 Jun 2026 | 41.0% | 26 |
| 5 Jun 2026 | 41.0% | 26 |
| 4 Jun 2026 | 40.9% | 26 |
| 3 Jun 2026 | 40.7% | 26 |
| 2 Jun 2026 | 40.6% | 26 |
| 1 Jun 2026 | 40.6% | 26 |
| 31 May 2026 | 40.7% | 26 |
| 30 May 2026 | 40.7% | 26 |
| 29 May 2026 | 40.7% | 26 |
Frequently asked questions
What is the current water level of Woods Lake?
As of June 9, 2026, Woods Lake is at 40.8% of its capacity, holding approximately 26 hm³ of water, according to BOM data.
Is Woods Lake reservoir full?
No. As of June 9, 2026, Woods Lake is within its normal operating range at 40.8% of its capacity, so it is not full.
Is the water level at Woods Lake rising or falling?
The level at Woods Lake has been broadly stable over the latest week on record (0.0 points).
How much water can Woods Lake hold?
Woods Lake has a total capacity of 64 hm³, of which about 44 hm³ is usable storage.
Where is Woods Lake reservoir located?
Woods Lake is located in Tasmania, Australia (coordinates 42.081°S, 147.003°E).
What is Woods Lake used for?
Woods Lake is used primarily for water supply, and is managed by BOM.