reservoirs.earth logo
Reservoirs.EARTH
Tasmania

Reservoir · Tasmania · Australia · BOM Water Data Online

Shannon Lagoon

55.4% full

Capacity

1.7 hm³

Volume stored

1 hm³

Coordinates

41.993°S, 146.739°E

Last updated

2026-06-09

Current fill

55.4%
Normal

vs 7 days ago

+4.5%

gaining

vs 1 year ago

-5.9%

year-over-year

7-day trend

rising

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -41.993, 146.739 · Open in Google Maps

About Shannon Lagoon

As of June 9, 2026, Shannon Lagoon is filled to 55.4% of its total capacity, holding roughly 1 hm³ of water out of a maximum 2 hm³. At this level the reservoir is within its normal operating range.

Over the most recent week on record the fill level has risen by 4.5 percentage points, and it is 5.9 points below its level on the same date a year earlier.

Across the readings we hold for Shannon Lagoon — 1094 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 23.1% (June 13, 2025) to a high of 103.2% (September 2, 2024). On average the reservoir is fullest around September and at its lowest around June.

It is operated by BOM primarily for water supply.

Key facts

Current fill level
55.4%
Water stored
1 hm³
Total capacity
2 hm³
7-day change
▲ 4.5 pts
Year-on-year
▼ 5.9 pts
Primary use
Water supply
Operator
BOM
Coordinates
41.993°S, 146.739°E
Last updated
June 9, 2026

Recent readings

DateFill levelVolume (hm³)
9 Jun 202655.4%1
8 Jun 202650.9%1
7 Jun 202651.6%1
6 Jun 202653.6%1
5 Jun 202656.3%1
4 Jun 202655.1%1
3 Jun 202659.4%1
2 Jun 202664.2%1
1 Jun 202662.5%1
31 May 202663.0%1
30 May 202663.4%1
29 May 202663.5%1

Frequently asked questions

What is the current water level of Shannon Lagoon?

As of June 9, 2026, Shannon Lagoon is at 55.4% of its capacity, holding approximately 1 hm³ of water, according to BOM data.

Is Shannon Lagoon reservoir full?

No. As of June 9, 2026, Shannon Lagoon is within its normal operating range at 55.4% of its capacity, so it is not full.

Is the water level at Shannon Lagoon rising or falling?

The level at Shannon Lagoon is rising — it gained 4.5 percentage points over the latest week on record.

How much water can Shannon Lagoon hold?

Shannon Lagoon has a total capacity of 2 hm³.

Where is Shannon Lagoon reservoir located?

Shannon Lagoon is located in Tasmania, Australia (coordinates 41.993°S, 146.739°E).

What is Shannon Lagoon used for?

Shannon Lagoon is used primarily for water supply, and is managed by BOM.

Nearby reservoirs

ShareXLinkedInWhatsApp