Reservoir · Tasmania · Australia · BOM Water Data Online
Pine Tier Lagoon
7.9% full
Capacity
7.4 hm³
Volume stored
1 hm³
River
Nive River
Year completed
1953
Coordinates
42.085°S, 146.485°E
Last updated
2026-06-10
Current fill
7.9%vs 7 days ago
-0.4%losing
vs 1 year ago
-6.0%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -42.085, 146.485 · Open in Google Maps
About Pine Tier Lagoon
As of June 10, 2026, Pine Tier Lagoon is filled to 7.9% of its total capacity, holding roughly 1 hm³ of water out of a maximum 7 hm³. At this level the reservoir is critically low. Of that total, about 2 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (-0.4 pts), and it is 6.0 points below its level on the same date a year earlier.
Across the readings we hold for Pine Tier Lagoon — 1087 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 0.0% (March 3, 2025) to a high of 47.5% (September 2, 2024). On average the reservoir is fullest around September and at its lowest around March.
The dam at Pine Tier Lagoon was completed in 1953. It is operated by BOM primarily for water supply. It lies within the Nive River Basin basin at 42.085°S, 146.485°E.
Key facts
- Current fill level
- 7.9%
- Water stored
- 1 hm³
- Total capacity
- 7 hm³
- Usable capacity
- 2 hm³
- 7-day change
- ▼ 0.4 pts
- Year-on-year
- ▼ 6.0 pts
- Primary use
- Water supply
- River
- Nive River
- River basin
- Nive River Basin
- Year completed
- 1953
- Operator
- BOM
- Coordinates
- 42.085°S, 146.485°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 7.9% | 1 |
| 9 Jun 2026 | 8.3% | 1 |
| 8 Jun 2026 | 8.8% | 1 |
| 7 Jun 2026 | 9.4% | 1 |
| 6 Jun 2026 | 9.9% | 1 |
| 5 Jun 2026 | 9.7% | 1 |
| 4 Jun 2026 | 8.6% | 1 |
| 3 Jun 2026 | 8.2% | 1 |
| 2 Jun 2026 | 8.0% | 1 |
| 1 Jun 2026 | 7.8% | 1 |
| 31 May 2026 | 7.6% | 1 |
| 30 May 2026 | 7.8% | 1 |
Frequently asked questions
What is the current water level of Pine Tier Lagoon?
As of June 10, 2026, Pine Tier Lagoon is at 7.9% of its capacity, holding approximately 1 hm³ of water, according to BOM data.
Is Pine Tier Lagoon reservoir full?
No. As of June 10, 2026, Pine Tier Lagoon is critically low at 7.9% of its capacity, so it is not full.
Is the water level at Pine Tier Lagoon rising or falling?
The level at Pine Tier Lagoon has been broadly stable over the latest week on record (-0.4 points).
How much water can Pine Tier Lagoon hold?
Pine Tier Lagoon has a total capacity of 7 hm³, of which about 2 hm³ is usable storage.
Where is Pine Tier Lagoon reservoir located?
Pine Tier Lagoon is located in Tasmania, Australia, within the Nive River Basin basin (coordinates 42.085°S, 146.485°E).
When was Pine Tier Lagoon dam built?
The dam at Pine Tier Lagoon was completed in 1953.
What is Pine Tier Lagoon used for?
Pine Tier Lagoon is used primarily for water supply, and is managed by BOM.