Reservoir · New South Wales · Australia · BOM Water Data Online
Wingecarribee
98.6% full
Capacity
25.9 hm³
Volume stored
26 hm³
River
Wingecarribee River
Year completed
1974
Coordinates
34.556°S, 150.496°E
Last updated
2026-06-10
Current fill
98.6%vs 7 days ago
0.0%stable
vs 1 year ago
-0.1%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -34.556, 150.496 · Open in Google Maps
About Wingecarribee
As of June 10, 2026, Wingecarribee is filled to 98.6% of its total capacity, holding roughly 26 hm³ of water out of a maximum 26 hm³. At this level the reservoir is high. Of that total, about 24 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Wingecarribee — 1095 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 74.3% (November 22, 2023) to a high of 122.0% (August 4, 2025). On average the reservoir is fullest around May and at its lowest around January.
The dam at Wingecarribee was completed in 1974. It is operated by BOM primarily for water supply. It lies within the Wingecarribee River Basin basin at 34.556°S, 150.496°E.
Key facts
- Current fill level
- 98.6%
- Water stored
- 26 hm³
- Total capacity
- 26 hm³
- Usable capacity
- 24 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 0.1 pts
- Primary use
- Water supply
- River
- Wingecarribee River
- River basin
- Wingecarribee River Basin
- Year completed
- 1974
- Operator
- BOM
- Coordinates
- 34.556°S, 150.496°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 98.6% | 26 |
| 9 Jun 2026 | 98.6% | 26 |
| 8 Jun 2026 | 98.6% | 26 |
| 7 Jun 2026 | 98.6% | 26 |
| 6 Jun 2026 | 98.5% | 26 |
| 5 Jun 2026 | 98.5% | 26 |
| 4 Jun 2026 | 98.5% | 26 |
| 3 Jun 2026 | 98.5% | 26 |
| 2 Jun 2026 | 98.8% | 26 |
| 1 Jun 2026 | 99.0% | 26 |
| 31 May 2026 | 99.0% | 26 |
| 30 May 2026 | 99.0% | 26 |
Frequently asked questions
What is the current water level of Wingecarribee?
As of June 10, 2026, Wingecarribee is at 98.6% of its capacity, holding approximately 26 hm³ of water, according to BOM data.
Is Wingecarribee reservoir full?
Wingecarribee is essentially full, sitting at 98.6% of capacity as of June 10, 2026.
Is the water level at Wingecarribee rising or falling?
The level at Wingecarribee has been broadly stable over the latest week on record (0.0 points).
How much water can Wingecarribee hold?
Wingecarribee has a total capacity of 26 hm³, of which about 24 hm³ is usable storage.
Where is Wingecarribee reservoir located?
Wingecarribee is located in New South Wales, Australia, within the Wingecarribee River Basin basin (coordinates 34.556°S, 150.496°E).
When was Wingecarribee dam built?
The dam at Wingecarribee was completed in 1974.
What is Wingecarribee used for?
Wingecarribee is used primarily for water supply, and is managed by BOM.