← New South Wales

Reservoir · New South Wales · Australia · BOM Water Data Online

Fitzroy Falls

93.6% full

Capacity

22.9 hm³

Volume stored

21 hm³

River

Yarrunga Creek

Year completed

1974

Coordinates

34.642°S, 150.498°E

Last updated

2026-10-26

Current fill

93.6%
High

vs 7 days ago

-0.1 pp

losing

vs 1 year ago

+10.0 pp

year-over-year

7-day trend

→

stable

Drought context

Storage vs October average

104%of normal

93.6% full on 2026-10-26, against an average of 90.1% for October across 4 years of readings (+3.5 points).

Rain over the last three months · 11 October 2026

Near normal

In the three months to 11 October 2026 the area around Fitzroy Falls had rain close to normal for the season. Rainfall compared with the long-run record for the same season at this point (Copernicus Global Drought Observatory, SPI-3 index −0.34). Rain, not storage. Australia drought figures →

Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-10-26.

Catchment Weather

Past 30 days + 14-day forecast · Open-Meteo

Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. 34.642°S, 150.498°E · Open in Google Maps

About Fitzroy Falls

As of October 26, 2026, Fitzroy Falls is filled to 93.6% of its total capacity, holding 21.46 hm³ of water out of a maximum 22.9 hm³. At this level the reservoir is high. Of that total, 10 hm³ is usable (live) storage.

Over the most recent week on record the fill level has held broadly steady (-0.1 pp), and it is 10.0 points above its level on the same date a year earlier.

Across the readings we hold for Fitzroy Falls — 1095 data points between October 28, 2023 and October 26, 2026 — the level has ranged from a low of 74.5% (March 27, 2025) to a high of 100.0% (May 23, 2025). On average the reservoir is fullest around July and at its lowest around December.

The dam at Fitzroy Falls was completed in 1974. It is operated by BOM primarily for water supply. It lies within the Yarrunga Creek Basin basin at 34.642°S, 150.498°E.

Key facts

Current fill level
93.6% of total capacity
Water stored
21.46 hm³
Total capacity
22.9 hm³
Usable capacity
10 hm³
7-day change
▼ 0.1 pp
Year-on-year
▲ 10.0 pp
Primary use
Water supply
River
Yarrunga Creek
River basin
Yarrunga Creek Basin
Year completed
1974
Operator
BOM
Coordinates
34.642°S, 150.498°E
Last updated
October 26, 2026

Recent readings

DateFill levelVolume (hm³)
26 Oct 202693.6%21.46
25 Oct 202693.6%21.46
24 Oct 202693.7%21.48
23 Oct 202693.7%21.48
22 Oct 202693.5%21.43
21 Oct 202693.5%21.43
20 Oct 202693.6%21.45
19 Oct 202693.7%21.48
18 Oct 202693.8%21.5
17 Oct 202693.8%21.5
16 Oct 202693.8%21.51
15 Oct 202693.7%21.47

Nearby reservoirs