Reservoir · Queensland · Australia · BOM Water Data Online
Tinaroo Falls
101.0% full
Capacity
438.9 hm³
Volume stored
443 hm³
Year completed
1958
Coordinates
17.208°S, 145.613°E
Last updated
2026-06-10
Current fill
101.0%vs 7 days ago
0.0%stable
vs 1 year ago
-0.8%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -17.208, 145.613 · Open in Google Maps
About Tinaroo Falls
As of June 10, 2026, Tinaroo Falls is filled to 101.0% of its total capacity, holding roughly 443 hm³ of water out of a maximum 439 hm³. At this level the reservoir is effectively full. Of that total, about 438 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Tinaroo Falls — 1095 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 69.7% (December 11, 2023) to a high of 108.3% (March 30, 2024). On average the reservoir is fullest around March and at its lowest around November.
The dam at Tinaroo Falls was completed in 1958. It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 101.0%
- Water stored
- 443 hm³
- Total capacity
- 439 hm³
- Usable capacity
- 438 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 0.8 pts
- Primary use
- Water supply
- Year completed
- 1958
- Operator
- BOM
- Coordinates
- 17.208°S, 145.613°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 101.0% | 443 |
| 9 Jun 2026 | 101.0% | 443 |
| 8 Jun 2026 | 101.0% | 443 |
| 7 Jun 2026 | 101.0% | 443 |
| 6 Jun 2026 | 101.0% | 443 |
| 5 Jun 2026 | 101.1% | 444 |
| 4 Jun 2026 | 101.1% | 444 |
| 3 Jun 2026 | 101.1% | 444 |
| 2 Jun 2026 | 101.2% | 444 |
| 1 Jun 2026 | 101.2% | 444 |
| 31 May 2026 | 101.2% | 444 |
| 30 May 2026 | 101.2% | 444 |
Frequently asked questions
What is the current water level of Tinaroo Falls?
As of June 10, 2026, Tinaroo Falls is at 101.0% of its capacity, holding approximately 443 hm³ of water, according to BOM data.
Is Tinaroo Falls reservoir full?
Tinaroo Falls is essentially full, sitting at 101.0% of capacity as of June 10, 2026.
Is the water level at Tinaroo Falls rising or falling?
The level at Tinaroo Falls has been broadly stable over the latest week on record (0.0 points).
How much water can Tinaroo Falls hold?
Tinaroo Falls has a total capacity of 439 hm³, of which about 438 hm³ is usable storage.
Where is Tinaroo Falls reservoir located?
Tinaroo Falls is located in Queensland, Australia (coordinates 17.208°S, 145.613°E).
When was Tinaroo Falls dam built?
The dam at Tinaroo Falls was completed in 1958.
What is Tinaroo Falls used for?
Tinaroo Falls is used primarily for water supply, and is managed by BOM.