Reservoir · Victoria · Australia · BOM Water Data Online
Sandhurst
92.1% full
Capacity
2.6 hm³
Volume stored
2 hm³
River
Off-stream
Year completed
1984
Coordinates
36.846°S, 144.244°E
Last updated
2026-06-09
Current fill
92.1%vs 7 days ago
-0.3%losing
vs 1 year ago
+5.2%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -36.846, 144.244 · Open in Google Maps
About Sandhurst
As of June 9, 2026, Sandhurst is filled to 92.1% of its total capacity, holding roughly 2 hm³ of water out of a maximum 3 hm³. At this level the reservoir is high.
Over the most recent week on record the fill level has held broadly steady (-0.3 pts), and it is 5.2 points above its level on the same date a year earlier.
Across the readings we hold for Sandhurst — 1067 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 20.0% (May 10, 2025) to a high of 102.2% (July 7, 2024). On average the reservoir is fullest around December and at its lowest around October.
The dam at Sandhurst was completed in 1984. It is operated by BOM primarily for water supply. It lies within the Off-stream Basin basin at 36.846°S, 144.244°E.
Key facts
- Current fill level
- 92.1%
- Water stored
- 2 hm³
- Total capacity
- 3 hm³
- 7-day change
- ▼ 0.3 pts
- Year-on-year
- ▲ 5.2 pts
- Primary use
- Water supply
- River
- Off-stream
- River basin
- Off-stream Basin
- Year completed
- 1984
- Operator
- BOM
- Coordinates
- 36.846°S, 144.244°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 92.1% | 2 |
| 8 Jun 2026 | 92.4% | 2 |
| 7 Jun 2026 | 92.5% | 2 |
| 6 Jun 2026 | 92.8% | 2 |
| 5 Jun 2026 | 93.2% | 2 |
| 4 Jun 2026 | 93.5% | 2 |
| 3 Jun 2026 | 93.8% | 2 |
| 2 Jun 2026 | 94.1% | 2 |
| 1 Jun 2026 | 94.2% | 2 |
| 31 May 2026 | 93.9% | 2 |
| 30 May 2026 | 93.6% | 2 |
| 29 May 2026 | 93.5% | 2 |
Frequently asked questions
What is the current water level of Sandhurst?
As of June 9, 2026, Sandhurst is at 92.1% of its capacity, holding approximately 2 hm³ of water, according to BOM data.
Is Sandhurst reservoir full?
No. As of June 9, 2026, Sandhurst is high at 92.1% of its capacity, so it is not full.
Is the water level at Sandhurst rising or falling?
The level at Sandhurst has been broadly stable over the latest week on record (-0.3 points).
How much water can Sandhurst hold?
Sandhurst has a total capacity of 3 hm³.
Where is Sandhurst reservoir located?
Sandhurst is located in Victoria, Australia, within the Off-stream Basin basin (coordinates 36.846°S, 144.244°E).
When was Sandhurst dam built?
The dam at Sandhurst was completed in 1984.
What is Sandhurst used for?
Sandhurst is used primarily for water supply, and is managed by BOM.