Reservoir · Western Australia · Australia · BOM Water Data Online
Moochalabra
86.9% full
Capacity
2 hm³
Volume stored
2 hm³
River
Moochalabra Creek
Year completed
1971
Coordinates
15.616°S, 128.104°E
Last updated
2026-06-09
Current fill
86.9%vs 7 days ago
-0.2%losing
vs 1 year ago
-4.6%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -15.616, 128.104 · Open in Google Maps
About Moochalabra
As of June 9, 2026, Moochalabra is filled to 86.9% of its total capacity, holding roughly 2 hm³ of water out of a maximum 2 hm³. At this level the reservoir is high.
Over the most recent week on record the fill level has held broadly steady (-0.2 pts), and it is 4.6 points below its level on the same date a year earlier.
Across the readings we hold for Moochalabra — 1094 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 59.6% (January 12, 2024) to a high of 97.4% (March 24, 2026). On average the reservoir is fullest around March and at its lowest around November.
The dam at Moochalabra was completed in 1971. It is operated by BOM primarily for water supply. It lies within the Moochalabra Creek Basin basin at 15.616°S, 128.104°E.
Key facts
- Current fill level
- 86.9%
- Water stored
- 2 hm³
- Total capacity
- 2 hm³
- 7-day change
- ▼ 0.2 pts
- Year-on-year
- ▼ 4.6 pts
- Primary use
- Water supply
- River
- Moochalabra Creek
- River basin
- Moochalabra Creek Basin
- Year completed
- 1971
- Operator
- BOM
- Coordinates
- 15.616°S, 128.104°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 86.9% | 2 |
| 8 Jun 2026 | 87.1% | 2 |
| 7 Jun 2026 | 87.2% | 2 |
| 6 Jun 2026 | 87.4% | 2 |
| 5 Jun 2026 | 87.6% | 2 |
| 4 Jun 2026 | 87.7% | 2 |
| 3 Jun 2026 | 87.8% | 2 |
| 2 Jun 2026 | 87.9% | 2 |
| 1 Jun 2026 | 88.0% | 2 |
| 31 May 2026 | 88.2% | 2 |
| 30 May 2026 | 88.3% | 2 |
| 29 May 2026 | 88.4% | 2 |
Frequently asked questions
What is the current water level of Moochalabra?
As of June 9, 2026, Moochalabra is at 86.9% of its capacity, holding approximately 2 hm³ of water, according to BOM data.
Is Moochalabra reservoir full?
No. As of June 9, 2026, Moochalabra is high at 86.9% of its capacity, so it is not full.
Is the water level at Moochalabra rising or falling?
The level at Moochalabra has been broadly stable over the latest week on record (-0.2 points).
How much water can Moochalabra hold?
Moochalabra has a total capacity of 2 hm³.
Where is Moochalabra reservoir located?
Moochalabra is located in Western Australia, Australia, within the Moochalabra Creek Basin basin (coordinates 15.616°S, 128.104°E).
When was Moochalabra dam built?
The dam at Moochalabra was completed in 1971.
What is Moochalabra used for?
Moochalabra is used primarily for water supply, and is managed by BOM.