Reservoir · Western Australia · Australia · BOM Water Data Online
Argyle (Ord River)
106.7% full
Capacity
10,760 hm³
Volume stored
11485 hm³
River
Ord River
Year completed
1971
Coordinates
16.315°S, 128.763°E
Last updated
2026-06-06
Current fill
106.7%vs 7 days ago
-0.1%losing
vs 1 year ago
-14.1%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-06.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -16.315, 128.763 · Open in Google Maps
About Argyle (Ord River)
As of June 6, 2026, Argyle (Ord River) is filled to 106.7% of its total capacity, holding roughly 11,485 hm³ of water out of a maximum 10,760 hm³. At this level the reservoir is effectively full. Of that total, about 10,436 hm³ is usable (live) storage.
Over the most recent week on record the fill level has held broadly steady (-0.1 pts), and it is 14.1 points below its level on the same date a year earlier.
Across the readings we hold for Argyle (Ord River) — 1041 data points between June 12, 2023 and June 6, 2026 — the level has ranged from a low of 83.0% (December 23, 2025) to a high of 149.8% (April 17, 2024). On average the reservoir is fullest around March and at its lowest around December.
The dam at Argyle (Ord River) was completed in 1971. It is operated by BOM primarily for water supply. It lies within the Ord River Basin basin at 16.315°S, 128.763°E.
Key facts
- Current fill level
- 106.7%
- Water stored
- 11,485 hm³
- Total capacity
- 10,760 hm³
- Usable capacity
- 10,436 hm³
- 7-day change
- ▼ 0.1 pts
- Year-on-year
- ▼ 14.1 pts
- Primary use
- Water supply
- River
- Ord River
- River basin
- Ord River Basin
- Year completed
- 1971
- Operator
- BOM
- Coordinates
- 16.315°S, 128.763°E
- Last updated
- June 6, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 6 Jun 2026 | 106.7% | 11,485 |
| 5 Jun 2026 | 106.8% | 11,496 |
| 4 Jun 2026 | 107.0% | 11,514 |
| 3 Jun 2026 | 107.2% | 11,535 |
| 2 Jun 2026 | 107.4% | 11,556 |
| 1 Jun 2026 | 107.6% | 11,573 |
| 31 May 2026 | 107.7% | 11,589 |
| 30 May 2026 | 107.9% | 11,607 |
| 29 May 2026 | 108.0% | 11,622 |
| 28 May 2026 | 108.1% | 11,636 |
| 27 May 2026 | 108.3% | 11,657 |
| 26 May 2026 | 108.5% | 11,676 |
Frequently asked questions
What is the current water level of Argyle (Ord River)?
As of June 6, 2026, Argyle (Ord River) is at 106.7% of its capacity, holding approximately 11,485 hm³ of water, according to BOM data.
Is Argyle (Ord River) reservoir full?
Argyle (Ord River) is essentially full, sitting at 106.7% of capacity as of June 6, 2026.
Is the water level at Argyle (Ord River) rising or falling?
The level at Argyle (Ord River) has been broadly stable over the latest week on record (-0.1 points).
How much water can Argyle (Ord River) hold?
Argyle (Ord River) has a total capacity of 10,760 hm³, of which about 10,436 hm³ is usable storage.
Where is Argyle (Ord River) reservoir located?
Argyle (Ord River) is located in Western Australia, Australia, within the Ord River Basin basin (coordinates 16.315°S, 128.763°E).
When was Argyle (Ord River) dam built?
The dam at Argyle (Ord River) was completed in 1971.
What is Argyle (Ord River) used for?
Argyle (Ord River) is used primarily for water supply, and is managed by BOM.