Reservoir · New South Wales · Australia · BOM Water Data Online
Mollee Weir
65.4% full
Capacity
3.3 hm³
Volume stored
2 hm³
Coordinates
30.269°S, 149.703°E
Last updated
2026-07-29
Current fill
65.4%vs 7 days ago
+0.3%gaining
vs 1 year ago
+65.3%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-07-29.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -30.269, 149.703 · Open in Google Maps
About Mollee Weir
As of July 29, 2026, Mollee Weir is filled to 65.4% of its total capacity, holding roughly 2 hm³ of water out of a maximum 3 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.3 pts), and it is 65.3 points above its level on the same date a year earlier.
Across the readings we hold for Mollee Weir — 1092 data points between July 30, 2023 and July 29, 2026 — the level has ranged from a low of 0.0% (August 8, 2023) to a high of 94.9% (March 30, 2025). On average the reservoir is fullest around October and at its lowest around March.
It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 65.4%
- Water stored
- 2 hm³
- Total capacity
- 3 hm³
- 7-day change
- ▲ 0.3 pts
- Year-on-year
- ▲ 65.3 pts
- Primary use
- Water supply
- Operator
- BOM
- Coordinates
- 30.269°S, 149.703°E
- Last updated
- July 29, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 29 Jul 2026 | 65.4% | 2 |
| 28 Jul 2026 | 65.1% | 2 |
| 27 Jul 2026 | 64.7% | 2 |
| 26 Jul 2026 | 64.4% | 2 |
| 25 Jul 2026 | 64.2% | 2 |
| 24 Jul 2026 | 64.6% | 2 |
| 23 Jul 2026 | 66.5% | 2 |
| 22 Jul 2026 | 67.2% | 2 |
| 21 Jul 2026 | 67.4% | 2 |
| 20 Jul 2026 | 67.8% | 2 |
| 19 Jul 2026 | 68.4% | 2 |
| 18 Jul 2026 | 68.7% | 2 |
Frequently asked questions
What is the current water level of Mollee Weir?
As of July 29, 2026, Mollee Weir is at 65.4% of its capacity, holding approximately 2 hm³ of water, according to BOM data.
Is Mollee Weir reservoir full?
No. As of July 29, 2026, Mollee Weir is within its normal operating range at 65.4% of its capacity, so it is not full.
Is the water level at Mollee Weir rising or falling?
The level at Mollee Weir has been broadly stable over the latest week on record (+0.3 points).
How much water can Mollee Weir hold?
Mollee Weir has a total capacity of 3 hm³.
Where is Mollee Weir reservoir located?
Mollee Weir is located in New South Wales, Australia (coordinates 30.269°S, 149.703°E).
What is Mollee Weir used for?
Mollee Weir is used primarily for water supply, and is managed by BOM.