Reservoir · New South Wales · Australia · BOM Water Data Online
Pindari
42.2% full
Capacity
312 hm³
Volume stored
132 hm³
Coordinates
29.385°S, 151.271°E
Last updated
2026-07-29
Current fill
42.2%vs 7 days ago
0.0%stable
vs 1 year ago
-0.4%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-07-29.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -29.385, 151.271 · Open in Google Maps
About Pindari
As of July 29, 2026, Pindari is filled to 42.2% of its total capacity, holding roughly 132 hm³ of water out of a maximum 312 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Pindari — 1096 data points between July 30, 2023 and July 29, 2026 — the level has ranged from a low of 35.4% (March 7, 2025) to a high of 83.8% (August 18, 2023). On average the reservoir is fullest around September and at its lowest around March.
It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 42.2%
- Water stored
- 132 hm³
- Total capacity
- 312 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 0.4 pts
- Primary use
- Water supply
- Operator
- BOM
- Coordinates
- 29.385°S, 151.271°E
- Last updated
- July 29, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 29 Jul 2026 | 42.2% | 132 |
| 28 Jul 2026 | 42.2% | 132 |
| 27 Jul 2026 | 42.2% | 132 |
| 26 Jul 2026 | 42.2% | 132 |
| 25 Jul 2026 | 42.2% | 132 |
| 24 Jul 2026 | 42.2% | 132 |
| 23 Jul 2026 | 42.2% | 132 |
| 22 Jul 2026 | 42.2% | 132 |
| 21 Jul 2026 | 42.2% | 132 |
| 20 Jul 2026 | 42.2% | 132 |
| 19 Jul 2026 | 42.2% | 132 |
| 18 Jul 2026 | 42.3% | 132 |
Frequently asked questions
What is the current water level of Pindari?
As of July 29, 2026, Pindari is at 42.2% of its capacity, holding approximately 132 hm³ of water, according to BOM data.
Is Pindari reservoir full?
No. As of July 29, 2026, Pindari is within its normal operating range at 42.2% of its capacity, so it is not full.
Is the water level at Pindari rising or falling?
The level at Pindari has been broadly stable over the latest week on record (0.0 points).
How much water can Pindari hold?
Pindari has a total capacity of 312 hm³.
Where is Pindari reservoir located?
Pindari is located in New South Wales, Australia (coordinates 29.385°S, 151.271°E).
What is Pindari used for?
Pindari is used primarily for water supply, and is managed by BOM.