Reservoir · Tasmania · Australia · BOM Water Data Online
Lake Meadowbank
44.5% full
Capacity
59.7 hm³
Volume stored
27 hm³
River
Derwent River
Year completed
1968
Coordinates
42.554°S, 146.760°E
Last updated
2026-06-09
Current fill
44.5%vs 7 days ago
+0.5%gaining
vs 1 year ago
-1.2%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -42.554, 146.760 · Open in Google Maps
About Lake Meadowbank
As of June 9, 2026, Lake Meadowbank is filled to 44.5% of its total capacity, holding roughly 27 hm³ of water out of a maximum 60 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.5 pts), and it is 1.2 points below its level on the same date a year earlier.
Across the readings we hold for Lake Meadowbank — 1094 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 1.9% (June 20, 2023) to a high of 48.8% (September 2, 2024). On average the reservoir is fullest around September and at its lowest around June.
The dam at Lake Meadowbank was completed in 1968. It is operated by BOM primarily for water supply. It lies within the Derwent River Basin basin at 42.554°S, 146.760°E.
Key facts
- Current fill level
- 44.5%
- Water stored
- 27 hm³
- Total capacity
- 60 hm³
- 7-day change
- ▲ 0.5 pts
- Year-on-year
- ▼ 1.2 pts
- Primary use
- Water supply
- River
- Derwent River
- River basin
- Derwent River Basin
- Year completed
- 1968
- Operator
- BOM
- Coordinates
- 42.554°S, 146.760°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 44.5% | 27 |
| 8 Jun 2026 | 44.0% | 26 |
| 7 Jun 2026 | 43.1% | 26 |
| 6 Jun 2026 | 42.6% | 25 |
| 5 Jun 2026 | 43.8% | 26 |
| 4 Jun 2026 | 45.1% | 27 |
| 3 Jun 2026 | 44.5% | 27 |
| 2 Jun 2026 | 44.9% | 27 |
| 1 Jun 2026 | 45.1% | 27 |
| 31 May 2026 | 43.8% | 26 |
| 30 May 2026 | 45.2% | 27 |
| 29 May 2026 | 44.6% | 27 |
Frequently asked questions
What is the current water level of Lake Meadowbank?
As of June 9, 2026, Lake Meadowbank is at 44.5% of its capacity, holding approximately 27 hm³ of water, according to BOM data.
Is Lake Meadowbank reservoir full?
No. As of June 9, 2026, Lake Meadowbank is within its normal operating range at 44.5% of its capacity, so it is not full.
Is the water level at Lake Meadowbank rising or falling?
The level at Lake Meadowbank has been broadly stable over the latest week on record (+0.5 points).
How much water can Lake Meadowbank hold?
Lake Meadowbank has a total capacity of 60 hm³.
Where is Lake Meadowbank reservoir located?
Lake Meadowbank is located in Tasmania, Australia, within the Derwent River Basin basin (coordinates 42.554°S, 146.760°E).
When was Lake Meadowbank dam built?
The dam at Lake Meadowbank was completed in 1968.
What is Lake Meadowbank used for?
Lake Meadowbank is used primarily for water supply, and is managed by BOM.