Reservoir · Utah · United States · BOR RISE
Pineview Reservoir Dam and Powerplant
74.2% full
Capacity
135.87 hm³
Volume stored
101 hm³
Coordinates
41.265°N, 111.810°W
Last updated
2026-06-10
Current fill
74.2%vs 7 days ago
-0.7%losing
vs 1 year ago
-14.3%year-over-year
7-day trend
→stable
Data source: BOR RISE — US Bureau of Reclamation — daily reservoir storage volume. Capacity is the design (normal full-pool) capacity from the US National Inventory of Dams (NID); fill % = current volume ÷ design capacity. Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. 41.265, -111.810 · Open in Google Maps
About Pineview Reservoir Dam and Powerplant
As of June 10, 2026, Pineview Reservoir Dam and Powerplant is filled to 74.2% of its total capacity, holding roughly 101 hm³ of water out of a maximum 136 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (-0.7 pts), and it is 14.3 points below its level on the same date a year earlier.
Across the readings we hold for Pineview Reservoir Dam and Powerplant — 1824 data points between June 13, 2021 and June 10, 2026 — the level has ranged from a low of 15.4% (September 30, 2021) to a high of 102.0% (May 30, 2024). On average the reservoir is fullest around June and at its lowest around October.
It is operated by BOR primarily for multiple purposes. It lies within the Utah basin at 41.265°N, 111.810°W.
Key facts
- Current fill level
- 74.2%
- Water stored
- 101 hm³
- Total capacity
- 136 hm³
- 7-day change
- ▼ 0.7 pts
- Year-on-year
- ▼ 14.3 pts
- Primary use
- Multipurpose
- River basin
- Utah
- Operator
- BOR
- Coordinates
- 41.265°N, 111.810°W
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 74.2% | 101 |
| 9 Jun 2026 | 74.9% | 102 |
| 8 Jun 2026 | 75.6% | 103 |
| 7 Jun 2026 | 76.2% | 104 |
| 6 Jun 2026 | 76.8% | 104 |
| 5 Jun 2026 | 77.5% | 105 |
| 4 Jun 2026 | 78.0% | 106 |
| 3 Jun 2026 | 78.6% | 107 |
| 2 Jun 2026 | 79.0% | 107 |
| 1 Jun 2026 | 79.5% | 108 |
| 31 May 2026 | 79.9% | 109 |
| 30 May 2026 | 80.4% | 109 |
Frequently asked questions
What is the current water level of Pineview Reservoir Dam and Powerplant?
As of June 10, 2026, Pineview Reservoir Dam and Powerplant is at 74.2% of its capacity, holding approximately 101 hm³ of water, according to BOR RISE (US Bureau of Reclamation) data.
Is Pineview Reservoir Dam and Powerplant reservoir full?
No. As of June 10, 2026, Pineview Reservoir Dam and Powerplant is within its normal operating range at 74.2% of its capacity, so it is not full.
Is the water level at Pineview Reservoir Dam and Powerplant rising or falling?
The level at Pineview Reservoir Dam and Powerplant has been broadly stable over the latest week on record (-0.7 points).
How much water can Pineview Reservoir Dam and Powerplant hold?
Pineview Reservoir Dam and Powerplant has a total capacity of 136 hm³.
Where is Pineview Reservoir Dam and Powerplant reservoir located?
Pineview Reservoir Dam and Powerplant is located in Utah, United States, within the Utah basin (coordinates 41.265°N, 111.810°W).
What is Pineview Reservoir Dam and Powerplant used for?
Pineview Reservoir Dam and Powerplant is used primarily for multiple purposes, and is managed by BOR.