Reservoir · Ohio · United States · USACE CWMS
Mohawk
0.4% full
Capacity
351.54 hm³
Volume stored
1 hm³
Coordinates
40.352°N, 82.088°W
Last updated
2026-07-30
Current fill
0.4%vs 7 days ago
0.0%stable
vs 1 year ago
+0.3%year-over-year
7-day trend
→stable
Data source: USACE CWMS — US Army Corps of Engineers — daily reservoir storage volume. Capacity is the design (normal full-pool) capacity from the US National Inventory of Dams (NID); fill % = current volume ÷ design capacity. Last reading: 2026-07-30.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. 40.352, -82.088 · Open in Google Maps
About Mohawk
As of July 30, 2026, Mohawk is filled to 0.4% of its total capacity, holding roughly 1 hm³ of water out of a maximum 352 hm³. At this level the reservoir is critically low.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Mohawk — 100 data points between July 31, 2021 and July 30, 2026 — the level has ranged from a low of 0.1% (July 31, 2021) to a high of 1.1% (July 6, 2026).
It is operated by USACE primarily for multiple purposes. It lies within the Ohio basin at 40.352°N, 82.088°W.
Key facts
- Current fill level
- 0.4%
- Water stored
- 1 hm³
- Total capacity
- 352 hm³
- 7-day change
- No change
- Year-on-year
- ▲ 0.3 pts
- Primary use
- Multipurpose
- River basin
- Ohio
- Operator
- USACE
- Coordinates
- 40.352°N, 82.088°W
- Last updated
- July 30, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 30 Jul 2026 | 0.4% | 1 |
| 29 Jul 2026 | 0.4% | 1 |
| 28 Jul 2026 | 0.4% | 1 |
| 27 Jul 2026 | 0.3% | 1 |
| 26 Jul 2026 | 0.4% | 1 |
| 25 Jul 2026 | 0.4% | 1 |
| 24 Jul 2026 | 0.4% | 1 |
| 23 Jul 2026 | 0.4% | 1 |
| 22 Jul 2026 | 0.4% | 2 |
| 21 Jul 2026 | 0.4% | 1 |
| 20 Jul 2026 | 0.4% | 1 |
| 19 Jul 2026 | 0.4% | 2 |
Frequently asked questions
What is the current water level of Mohawk?
As of July 30, 2026, Mohawk is at 0.4% of its capacity, holding approximately 1 hm³ of water, according to USACE CWMS (US Army Corps of Engineers) data.
Is Mohawk reservoir full?
No. As of July 30, 2026, Mohawk is critically low at 0.4% of its capacity, so it is not full.
Is the water level at Mohawk rising or falling?
The level at Mohawk has been broadly stable over the latest week on record (0.0 points).
How much water can Mohawk hold?
Mohawk has a total capacity of 352 hm³.
Where is Mohawk reservoir located?
Mohawk is located in Ohio, United States, within the Ohio basin (coordinates 40.352°N, 82.088°W).
What is Mohawk used for?
Mohawk is used primarily for multiple purposes, and is managed by USACE.