Reservoir · Victoria · Australia · BOM Water Data Online
Tarago
90.7% full
Capacity
37.6 hm³
Volume stored
34 hm³
River
Tarago River
Year completed
1968
Coordinates
37.999°S, 145.924°E
Last updated
2026-06-09
Current fill
90.7%vs 7 days ago
0.0%stable
vs 1 year ago
-1.8%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-09.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -37.999, 145.924 · Open in Google Maps
About Tarago
As of June 9, 2026, Tarago is filled to 90.7% of its total capacity, holding roughly 34 hm³ of water out of a maximum 38 hm³. At this level the reservoir is high.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it is 1.8 points below its level on the same date a year earlier.
Across the readings we hold for Tarago — 1083 data points between June 12, 2023 and June 9, 2026 — the level has ranged from a low of 86.0% (June 22, 2025) to a high of 102.4% (October 5, 2023). On average the reservoir is fullest around December and at its lowest around May.
The dam at Tarago was completed in 1968. It is operated by BOM primarily for water supply. It lies within the Tarago River Basin basin at 37.999°S, 145.924°E.
Key facts
- Current fill level
- 90.7%
- Water stored
- 34 hm³
- Total capacity
- 38 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 1.8 pts
- Primary use
- Water supply
- River
- Tarago River
- River basin
- Tarago River Basin
- Year completed
- 1968
- Operator
- BOM
- Coordinates
- 37.999°S, 145.924°E
- Last updated
- June 9, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 9 Jun 2026 | 90.7% | 34 |
| 8 Jun 2026 | 90.7% | 34 |
| 7 Jun 2026 | 90.6% | 34 |
| 6 Jun 2026 | 90.6% | 34 |
| 5 Jun 2026 | 90.6% | 34 |
| 4 Jun 2026 | 90.6% | 34 |
| 3 Jun 2026 | 90.5% | 34 |
| 2 Jun 2026 | 90.5% | 34 |
| 1 Jun 2026 | 90.5% | 34 |
| 31 May 2026 | 90.4% | 34 |
| 30 May 2026 | 90.4% | 34 |
| 29 May 2026 | 90.3% | 34 |
Frequently asked questions
What is the current water level of Tarago?
As of June 9, 2026, Tarago is at 90.7% of its capacity, holding approximately 34 hm³ of water, according to BOM data.
Is Tarago reservoir full?
No. As of June 9, 2026, Tarago is high at 90.7% of its capacity, so it is not full.
Is the water level at Tarago rising or falling?
The level at Tarago has been broadly stable over the latest week on record (0.0 points).
How much water can Tarago hold?
Tarago has a total capacity of 38 hm³.
Where is Tarago reservoir located?
Tarago is located in Victoria, Australia, within the Tarago River Basin basin (coordinates 37.999°S, 145.924°E).
When was Tarago dam built?
The dam at Tarago was completed in 1968.
What is Tarago used for?
Tarago is used primarily for water supply, and is managed by BOM.