Reservoir · Western Australia · Australia · BOM Water Data Online
Logue Brook
51.6% full
Capacity
21.7 hm³
Volume stored
11 hm³
River
Logue Brook
Year completed
1963
Coordinates
32.998°S, 115.974°E
Last updated
2026-06-07
Current fill
51.6%vs 7 days ago
0.0%stable
vs 1 year ago
-0.2%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-07.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -32.998, 115.974 · Open in Google Maps
About Logue Brook
As of June 7, 2026, Logue Brook is filled to 51.6% of its total capacity, holding roughly 11 hm³ of water out of a maximum 22 hm³. At this level the reservoir is within its normal operating range.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Logue Brook — 1026 data points between June 12, 2023 and June 7, 2026 — the level has ranged from a low of 50.4% (May 24, 2024) to a high of 76.9% (October 5, 2023). On average the reservoir is fullest around October and at its lowest around May.
The dam at Logue Brook was completed in 1963. It is operated by BOM primarily for water supply. It lies within the Logue Brook Basin basin at 32.998°S, 115.974°E.
Key facts
- Current fill level
- 51.6%
- Water stored
- 11 hm³
- Total capacity
- 22 hm³
- 7-day change
- No change
- Year-on-year
- ▼ 0.2 pts
- Primary use
- Water supply
- River
- Logue Brook
- River basin
- Logue Brook Basin
- Year completed
- 1963
- Operator
- BOM
- Coordinates
- 32.998°S, 115.974°E
- Last updated
- June 7, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 7 Jun 2026 | 51.6% | 11 |
| 6 Jun 2026 | 51.6% | 11 |
| 5 Jun 2026 | 51.6% | 11 |
| 4 Jun 2026 | 51.5% | 11 |
| 3 Jun 2026 | 51.4% | 11 |
| 2 Jun 2026 | 51.5% | 11 |
| 1 Jun 2026 | 51.5% | 11 |
| 31 May 2026 | 51.4% | 11 |
| 30 May 2026 | 51.3% | 11 |
| 29 May 2026 | 51.2% | 11 |
| 28 May 2026 | 51.2% | 11 |
| 27 May 2026 | 51.2% | 11 |
Frequently asked questions
What is the current water level of Logue Brook?
As of June 7, 2026, Logue Brook is at 51.6% of its capacity, holding approximately 11 hm³ of water, according to BOM data.
Is Logue Brook reservoir full?
No. As of June 7, 2026, Logue Brook is within its normal operating range at 51.6% of its capacity, so it is not full.
Is the water level at Logue Brook rising or falling?
The level at Logue Brook has been broadly stable over the latest week on record (0.0 points).
How much water can Logue Brook hold?
Logue Brook has a total capacity of 22 hm³.
Where is Logue Brook reservoir located?
Logue Brook is located in Western Australia, Australia, within the Logue Brook Basin basin (coordinates 32.998°S, 115.974°E).
When was Logue Brook dam built?
The dam at Logue Brook was completed in 1963.
What is Logue Brook used for?
Logue Brook is used primarily for water supply, and is managed by BOM.