Reservoir · New South Wales · Australia · BOM Water Data Online
Brogo
100.5% full
Capacity
9 hm³
Volume stored
9 hm³
Coordinates
36.477°S, 149.720°E
Last updated
2026-06-10
Current fill
100.5%vs 7 days ago
0.0%stable
vs 1 year ago
+0.1%year-over-year
7-day trend
→stable
Data source: Bureau of Meteorology — Water Data Online (KiWIS) — daily mean storage volume, quality-controlled. Capacity from the BOM Water Storages ArcGIS layer (total design capacity in ML). Last reading: 2026-06-10.
Catchment Weather
Past 30 days + 14-day forecast · Open-Meteo
Satellite imagery: Esri, Maxar, Earthstar Geographics. Map: Esri, HERE, Garmin, © OpenStreetMap contributors. -36.477, 149.720 · Open in Google Maps
About Brogo
As of June 10, 2026, Brogo is filled to 100.5% of its total capacity, holding roughly 9 hm³ of water out of a maximum 9 hm³. At this level the reservoir is effectively full.
Over the most recent week on record the fill level has held broadly steady (+0.0 pts), and it sits close to where it was a year earlier.
Across the readings we hold for Brogo — 1095 data points between June 12, 2023 and June 10, 2026 — the level has ranged from a low of 85.0% (January 14, 2026) to a high of 120.9% (December 26, 2023). On average the reservoir is fullest around May and at its lowest around November.
It is operated by BOM primarily for water supply.
Key facts
- Current fill level
- 100.5%
- Water stored
- 9 hm³
- Total capacity
- 9 hm³
- 7-day change
- No change
- Year-on-year
- ▲ 0.1 pts
- Primary use
- Water supply
- Operator
- BOM
- Coordinates
- 36.477°S, 149.720°E
- Last updated
- June 10, 2026
Recent readings
| Date | Fill level | Volume (hm³) |
|---|---|---|
| 10 Jun 2026 | 100.5% | 9 |
| 9 Jun 2026 | 100.5% | 9 |
| 8 Jun 2026 | 100.5% | 9 |
| 7 Jun 2026 | 100.5% | 9 |
| 6 Jun 2026 | 100.5% | 9 |
| 5 Jun 2026 | 100.5% | 9 |
| 4 Jun 2026 | 100.5% | 9 |
| 3 Jun 2026 | 100.6% | 9 |
| 2 Jun 2026 | 100.6% | 9 |
| 1 Jun 2026 | 100.6% | 9 |
| 31 May 2026 | 100.7% | 9 |
| 30 May 2026 | 100.8% | 9 |
Frequently asked questions
What is the current water level of Brogo?
As of June 10, 2026, Brogo is at 100.5% of its capacity, holding approximately 9 hm³ of water, according to BOM data.
Is Brogo reservoir full?
Brogo is essentially full, sitting at 100.5% of capacity as of June 10, 2026.
Is the water level at Brogo rising or falling?
The level at Brogo has been broadly stable over the latest week on record (0.0 points).
How much water can Brogo hold?
Brogo has a total capacity of 9 hm³.
Where is Brogo reservoir located?
Brogo is located in New South Wales, Australia (coordinates 36.477°S, 149.720°E).
What is Brogo used for?
Brogo is used primarily for water supply, and is managed by BOM.